Triple‑Station Digital FCT Test Jig | Multi‑Channel PCB QC Tester

A three-channel manual FCT fixture with independent digital display meters and toggle clamps, providing real-time readouts for three independent test stations in mass production QC.

Front view of triple-station digital FCT test jig with three red toggle clamps, independent digital readout displays, metal probe fixtures, integrated power switch, multi-channel manual test fixture for simultaneous PCB functional inspection.

This long-base jig carries three separate test stations, each with its own red toggle clamp, probe assembly and digital display meter. The meters show measured values or pass/fail readings per channel, so operators can monitor three units at once on one bench. The black base houses the control switches and wiring, and each cavity cradles its own PCB or module. The design targets mass production QC where three related units are tested in parallel, and digital readouts remove the need for a separate instrument at every station.

Key Features

  • Three independent test stations on one shared base
  • Separate toggle clamps and probe assemblies per channel
  • Digital display meters with real-time readouts per station
  • Multi-channel layout for parallel unit inspection
  • Custom cradles matched to each tested product
  • Front power switch and shared control wiring

Applications

  • Mass production QC of three related boards or modules
  • Parallel testing where per-station digital readout is required
  • Production lines needing visible measured values at the bench
  • Mid-to-high volume manual inspection without pneumatics

FAQ

Q: What do the digital meters display?
They show the measured value or pass/fail state for each channel, such as voltage, signal status or test result, depending on the connected instrument.

Q: Can the three stations test different products?
Each cavity is independent, so mixed products are possible, though the fixture is most efficient when all three run the same model.

Q: Is this fixture connected to external test equipment?
Yes, signals route to external meters or instruments; the local digital displays provide a visible readout at the station.

Scroll to Top