Top Load Manual FCT Functional Fixture with Top-Down Clamping for Assembled PCBA

A top-down clamping manual FCT jig whose acrylic press plate ensures uniform probe contact on assembled PCBA during functional testing.

Overhead factory shot of top load manual FCT functional fixture, phenolic laminate frame, red heavy-duty toggle clamp, clear acrylic cover, embedded PCB positioning tray, compact manual benchtop jig for circuit board functional testing.

This brown-base manual fixture presses down from above rather than from the side. The central red toggle clamp pulls the upper acrylic plate down over the assembled PCBA, spreading clamp force so probes contact evenly across the board surface. Guide posts keep the plate aligned, and the lower cradle holds the assembled PCBA in place. The top-load arrangement suits boards with components around the edges, because the clamp applies pressure through the center probe area instead of from a side lever. Green buttons on the base start the test cycle.

Key Features

  • Top-down clamping action from the central toggle clamp
  • Acrylic press plate distributing force across the board
  • Guide posts keeping the upper plate aligned
  • Lower custom cradle for the assembled PCBA
  • Even probe contact across the assembled board surface
  • Manual operation with front start buttons

Applications

  • Assembled PCBA with edge components leaving a central test area
  • Manual testing where uniform probe contact is required
  • Small-to-mid volume production and repair stations
  • Boards unsuitable for side-lever clamping designs

FAQ

Q: What does “top load” mean for this fixture?
The clamp presses the probe plate straight down from above, rather than pulling from the side, which suits boards with side-mounted components.

Q: Does the acrylic plate protect the board?
The transparent plate spreads clamp force and shields probes; it also lets operators see the probe contact during the cycle.

Q: Can this design be converted to pneumatic?
Yes, a top-load manual frame can be upgraded with a cylinder in place of the toggle clamp, keeping the same probe plate and cradle.

Scroll to Top