Pneumatic Multi-Probe FCT Tester for Simultaneous Multi-PCB Functional Inspection

An air-driven FCT jig with a dense multi-point probe array and touch control panel, built for rapid simultaneous functional inspection of PCBs on the production line.

Angled studio shot of pneumatic multi-probe FCT tester, air cylinder driven probe assembly, PCB locating tray, touchscreen display, control push buttons, green start button and red emergency stop, automated functional test fixture for batch PCB testing.

This black-base pneumatic tester carries a large probe head with many spring probes arranged to contact several test points at once. The cylinder lowers the probe head over the loaded PCB, while the front touch panel and indicator buttons run the test sequence and show pass/fail results. The open frame leaves room for wiring and probe adjustment, and the base houses control electronics and the power switch. Designed for rapid repeated cycles, it suits boards with many test points where manual clamping would be slow or uneven.

Key Features

  • Dense multi-point spring probe array for simultaneous contact
  • Pneumatic cylinder-driven head lowering and pressing
  • Front touch panel with status buttons and result indication
  • Open frame allowing probe wiring and adjustment access
  • Custom probe layout matched to multi-point PCBs
  • Benchtop base with integrated control electronics

Applications

  • Production line testing of boards with many contact points
  • Rapid functional verification where manual clamping is too slow
  • Mid-to-high volume PCBA inspection with compressed air
  • Boards requiring even, repeatable probe contact across the surface

FAQ

Q: Can the probe count be changed for a different board?
The probe plate and pin positions are remachined for each new PCB; the pneumatic frame and control base can be reused with a new probe assembly.

Q: Does the touch panel connect to external test instruments?
Yes, wiring can route to measurement instruments or a PC; the local panel displays the local result and machine status.

Q: Is this tester suitable for large panels?
It can be sized for larger boards, but very large panels usually use a gantry-style pneumatic fixture for stable pressing.

Scroll to Top