Dual-Cavity Pneumatic FCT Jig with HMI Touchscreen for Dual-Piece PCBA Testing

A double-position air-operated FCT functional tester with an integrated HMI touch panel, built for fast dual-piece PCBA testing in production QC.

Studio shot of dual-cavity pneumatic FCT jig equipped with two air cylinders, acrylic pressing modules, PCB probe nests, built-in touchscreen, start and stop buttons, high-efficiency double-station functional test fixture for circuit boards.

This black-frame pneumatic jig holds two PCBA cavities side by side, each with its own probe head and air cylinder. A wide touchscreen mounted on the front base runs the test sequence, displays measured values and shows pass/fail results for both positions. Red and green buttons sit beside the screen for manual start and reset, and the acrylic probe plates protect the loaded boards. The dual-cavity layout halves the number of loading motions per unit compared with a single-station jig, while the touchscreen centralizes test settings and result records.

Key Features

  • Two side-by-side cavities for dual-piece PCBA testing
  • Independent air cylinders and probe heads per position
  • Integrated HMI touchscreen for sequence and result display
  • Red/green start and reset buttons beside the panel
  • Acrylic probe plates protecting loaded boards
  • Shared base housing controls and wiring for both stations

Applications

  • Fast dual-piece testing of identical PCBA in production
  • QC stations needing on-screen test settings and results
  • Mid-to-high volume lines with compressed air supply
  • Products where two boards are tested in one cycle

FAQ

Q: Can the two cavities run different test programs?
The HMI can store separate programs, but most dual-cavity fixtures run the same product in both positions to balance cycle time.

Q: Does the touchscreen store test results?
The panel can display and log results; external data upload to a PC or MES can be added through the fixture wiring.

Q: Are the two cylinders synchronized?
They can be triggered together or separately depending on the valve and control design, allowing independent station operation if needed.

Scroll to Top