Safety Light Curtain Pneumatic FCT Test Machine for High-Volume PCBA Production

A pneumatic FCT tester protected by light curtain barriers, stopping the press cycle if hands enter the test area, designed for high-volume electronics production.

Clean studio front view of safety light curtain FCT test machine fitted with dual yellow safety light curtains, transparent protective cover, internal pneumatic pressing jig, front control panel with E-stop, reset, up button, power switch and LCD touch screen.
Angled workshop shot of safety light curtain FCT test machine, enclosed acrylic safety guard, warning label, side control panel with emergency stop button, touch display and pneumatic pipeline, automated functional test fixture for electronics production.

This bench-top pneumatic FCT machine uses optical light barriers along the front opening instead of a solid cover. If an operator reaches into the pressing zone, the light curtain triggers an immediate stop, protecting hands during the automatic cycle. The yellow side columns hold the curtain emitters and receivers, while the central cylinder presses the probe plate onto the PCBA. Front controls include an E-stop, reset button, power switch and start button, and a small display shows machine status. The design balances open loading access with machine safety for busy production floors.

Key Features

  • Light curtain barriers across the front test opening
  • Pneumatic cylinder-driven probe pressing for consistent contact
  • Immediate cycle stop when the safety beam is interrupted
  • Yellow protective side columns and open-front loading access
  • E-stop, reset, power and start controls on the front panel
  • Custom probe plate and locating pins for the target PCBA

Applications

  • High-volume PCBA testing where operators load boards frequently
  • Production floors requiring hand protection without a fixed cover
  • Mid-to-high volume lines with available compressed air
  • Workstations where fast access and safety are both required

FAQ

Q: How does the light curtain differ from a plastic safety cover?
The curtain leaves the front open for easy loading but stops the machine if the beam is broken; a fixed cover blocks access physically but slows loading.

Q: Will the machine stop mid-cycle if the beam is touched?
Yes, the pressing cycle pauses or stops when the beam is interrupted, and it restarts only after the area is clear and the operator resets the machine.

Q: Can the curtain range be adjusted for larger boards?
The curtain height and mounting position are customized to the fixture opening and board size during design.

Scroll to Top