Semi-Finished Product FCT Test Fixture | In-Process Assembly Tester with Counter

This stainless-steel FCT fixture checks partially assembled products mid-production, using PASS/FAIL buttons and a digital counter to catch defects before final assembly.

Front view of a semi-finished product FCT test fixture with a brushed stainless steel control panel, labeled PASS green button and FAIL red button, a digital production counter, and a clear protective cover over the multi-pin probe testing nest.
Close-up of the upper probe plate of a semi-finished product FCT test fixture, showing an array of black-capped spring test pins arranged on a transparent acrylic plate, with two stainless steel guide posts and a metal locating frame.
Interior view of an FCT test fixture under assembly, exposing the green probe PCB, gold test pins, red green and white wiring harnesses, aviation connectors and terminal blocks, with a technician's hands adjusting the acrylic jig plate on a workbench.
Angled view of a semi-finished product FCT test fixture on a factory floor, with a stainless steel base, green PASS and red FAIL push buttons, a digital counter, and a transparent cover enclosing the array of probe pins and guide posts.

Installed between assembly stages, this fixture tests a semi-finished unit that has not yet received its full housing or final accessories. The stainless steel body withstands repeated workshop handling, and the upper probe array contacts multiple test points on the partial assembly. A green PASS button and red FAIL button mark the inspection result, while the digital counter records units checked. The transparent cover protects the probe area during cycling, helping operators catch early defects that would otherwise cause rework later in the line.

Key Features

  • Designed for in-process semi-finished assembly inspection, not final product test
  • Brushed stainless steel enclosure for durable workshop use
  • Multi-point spring probe array arranged for partial assembly test points
  • Green PASS / red FAIL indicator buttons for clear result marking
  • Digital production counter for in-process yield tracking
  • Transparent upper cover shielding the probe and contact area

Applications

  • Mid-line inspection of partially assembled electronic modules
  • Early defect screening before housing, labeling or final assembly
  • Production stages where partial units are still accessible for probing
  • QC stations tracking in-process pass rate and rework volume

FAQ

Q: How is this different from a finished product FCT fixture?
It tests the partially assembled unit before final enclosure and accessories, so probes and cradles are arranged around exposed internal or side test points.

Q: What does the counter record?
The counter tallies each inspected semi-finished unit, allowing supervisors to track in-process output and defect ratio between assembly stages.

Q: Can the PASS/FAIL signal connect to external test software?
Yes, wiring can be routed to a test instrument or PLC; the local buttons provide a visible indicator alongside the external signal.

Scroll to Top