Single-Station Manual FCT Test Jig for PCB Functional Testing

This single-station manual FCT test jig is designed for independent PCB functional testing, with a hand-operated toggle clamp and custom probe set to ensure stable contact during workshop inspection.

Two single-station manual FCT test jigs placed side by side on a workbench, an operator pressing the red-handled toggle clamp on the right unit; each features an acrylic probe plate, custom PCB nest and spring-loaded guide posts.
Front view of a manual PCB FCT tester, with a hand lifting the toggle clamp lever; visible spring-loaded probe pins, acrylic upper jig plate, machined fixture base, power switch and blue product identification label.
Rear panel view of a manual FCT test jig, showing 5V and 9V power ports, exposed internal interface board, barcode specification label, guide rods and springs, held by hand on a factory workbench.
Angled close-up of a single-station manual FCT test jig held in hand, showing the independent toggle clamp, clear acrylic probe plate, custom PCB fixture base and spring guide posts, with wiring harness routed to the test probes.

Unlike a unified dual-cavity fixture, these are two standalone manual FCT units sharing only the workbench space. Each jig has its own hand-operated toggle clamp, acrylic pressure plate, probe assembly and base, so one can run while the other is being loaded or unloaded. This arrangement gives flexibility for mixed board models, small batch orders or parallel testing without investing in a larger pneumatic system. The black bakelite base provides stable support, and the probe pins align to the test points of each assigned PCB.

Key Features

  • Independent single-station design for individual PCB functional testing
  • Manual toggle clamp for easy loading, unloading and operation
  • Custom probe layout aligned to the target PCB test points
  • Compact benchtop structure suitable for small batch production
  • Durable base and acrylic pressure plate for repeated daily use

Applications

  • PCB functional testing in small batch production
  • Workshop QC inspection and repair station verification
  • Prototype testing and low-volume assembly line checking

FAQ

Q: Are these two jigs locked together as one machine?
No. Each is a separate single-station fixture; they are only positioned side by side on the same bench for operator convenience.

Q: Can one jig test a different board from the other?
Yes, because the probe sets and bases are independent, each unit can be customized for its own PCB model.

Q: Does this manual jig need an air compressor?
No. The clamp is hand-operated, so it works in locations without pneumatic supply, though electrical signal wiring to the test instrument is still required.

Scroll to Top